Fluke 87V-MAX - Digital Multimeter 1000V True-RMS

The 87V MAX contains all the trusted features of the most popular digital multimeter used today, the Fluke 87V, and then some. From wet, dusty or dark environments to long days, the 87V MAX was designed to help you finish the most on a work site. It features a unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment; using true-rms ac voltage and current for accurate measurements on non-linear signals.

The 87V MAX is built with an IP67 rated, industrial-strength case and a removable holster. The holster doubles as a test probe holder for easier, one-handed operation. This meter is fully waterproof and dust proof keep working reliably no matter where your job takes you.

Includes

• TL175 TwistGuard® test leads
• AC175 Alligator clips
• 80BK-A temperature probe
• Removable holster with test lead storage
• Three AA batteries (installed)

Features

• Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster
• Waterproof, dustproof IP67 case for the most extreme work sites
• Premium TL175 TwistGuard™ test leads
• Double the battery life of the 87V (up to 800 hours); backlit keys for dark environments

Specifications

• IP rating: IEC 60529 IP67
• Power: Three AA batteries, ~800 hours typical, without backlight
• Size: 6.0 × 10.1 × 21.5 cm (with holster)
• Weight: 698.5 g (with holster)
• Warranty: Limited lifetime

Accuracy Specifications

• DC Voltage
  • Range: 0.1 mV to 1000 V
  • Accuracy: ±(0.05% + 1)
  • Maximum resolution: 0.1 mV
• AC Voltage
  • Range: 0.1 mV to 1000 V
  • Accuracy: ±(0.7% + 4) True RMS
  • AC bandwidth: 20 kHz with low-pass filter; 3 dB @ 1 kHz
  • Maximum resolution: 0.1 mV
• DC Current
  • Range: 0.1 µA to 10 A (20 A for 30 seconds maximum)
  • Amps accuracy: ±(0.2% + 2)
  • Maximum resolution: 0.1 µA
• AC Current
  • Range: 0.1 µA to 10 A (20 A for 30 seconds maximum)
  • Amps accuracy: ±(1.0% + 2) True RMS
  • Maximum resolution: 0.1 µA
• Resistance
  • Range: 0.1 Ω to 50 MΩ
  • Accuracy: ±(0.2% + 1)
  • Maximum resolution: 0.1 Ω
• Capacitance
  • Range: 0.01 nF to 9,999 µF
  • Accuracy: ±(1% + 2)
  • Maximum resolution: 0.01 nF
• Frequency
  • Range: 0.5 Hz to 199.99 kHz
  • Accuracy: ±(0.005% + 1)
  • Maximum resolution: 0.01 Hz
• Duty Cycle
  • Maximum duty cycle: 99.9%
  • Accuracy: ±(0.2% per kHz + 0.1%)
  • Maximum resolution: 0.1%
• Temperature Measurement
  • –200.0 °C to 1090 °C (–328.0 °F to 1994.0 °F), excluding probe
  • 80 BK temperature probe
    • –40.0 °C to 260 °C, ±2.2 °C or 2%, whichever is greater
    • –40.0 °F to 500 °F, ±4.0 °F or 2%, whichever is greater
• Conductance
  • Maximum conductance: 60.00 nS
  • Accuracy: ±(1.0% + 10)
  • Maximum resolution: 0.01 nS
• Diode Test
  • Range: 2 V
  • Resolution: 0.001 V
  • Accuracy: ±(1% + 1)
• Diagnostics and Data Storage
  • Peak Min/Max: 250 µs
  • Min/Max/Avg: Yes
  • Reading hold / Auto (Touch) Hold: Yes
  • Relative reference: Yes
• Display
  • Digital: 6000 counts, updates 4/second
  • Digital (high-resolution mode): 19,999 counts
  • Analog bar graph: 32 segments, updates 40/second
  • Backlight: Two level
  • Low-pass filter (VFD measurements): Yes
  • Input Alert™: Yes
• Safety Specifications
  • Safety rating: IEC 61010-1 Pollution Degree 2
  • Measurement category: IEC 61010-2-033, CAT IV 600 V, CAT III 1000 V
  • Agency approvals: CE, CSA

• Environmental Specifications
  • Operating temperature: –15 °C to 55 °C; to –40 °C for 20 minutes when taken from 20 °C
  • Storage temperature: –40 °C to +60 °C
  • Humidity (without condensation): 0%–90% (0 °C–35 °C)
  • Humidity (without condensation): 0%–70% (35 °C–55 °C)
  • Operating altitude: 2000 m