Fluke 87V - Industrial Multimeter 1000V True-RMS

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.

Easy-access door for fast battery changes without breaking the calibration seal
Analog bar graph for fast changing or unstable signals
Large digit display with bright, two-level backlight for easier reading in low light
Touch Hold keeps readings on display even after removing probes
The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.

Removable holster with built in test lead and probe storage for convenience
The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

Includes

• TL75 Test Leads (TL175 EUR)
• AC175 Alligator Clips
• Holster
• 9V Battery (Installed)
• 80BK Temperature Probe

Features

• Identify complex signal problems fast
• Supports accurate measurements on VFDs using a low-pass filter
• Captures intermittents as fast as 250 µS with Peak Capture

Specifications

• Size: 201 × 98 × 52 mm (with holster)
• Weight
  • 355 g
  • 624 g: with holster
• Display
  • Digital: 6000 counts, updates 4/sec
  • Digital (high-resolution mode): 19,999 counts
  • Analog: 32 segments, updates 40/sec
• Frequency: 19,999 counts, updates 3/sec at > 10 Hz
• Warranty: Lifetime
• Battery life: Alkaline ~400 hours typical, without backlight
• Shock: 1 meter drop per IEC 61010-1:2001
• Vibration: Per MIL-PRF-28800 for a Class 2 instrument

Accuracy Specifications

• Voltage DC
  • Maximum voltage: 1000 V
  • Accuracy: ±(0.05% + 1)
  • Maximum resolution: 10 µV
• Voltage AC
  • Maximum voltage: 1000 V
  • Accuracy: ±(0.7% + 2) True RMS
  • AC bandwidth: 20 kHz with low-pass filter; 3 dB @ 1 kHz
  • Maximum resolution: 0.1 mV
• Current DC
  • Maximum amps: 10 A (20 A for 30 seconds maximum)
  • Amps accuracy: ±(0.2% + 2)
  • Maximum resolution: 0.01 µA
• Current AC
  • Maximum amps: 10 A (20 A for 30 seconds maximum)
  • Amps accuracy: ±(1.0% + 2) True RMS
  • Maximum resolution: 0.1 µA
• Resistance
  • Maximum resistance: 50 MΩ
  • Accuracy: ±(0.2% + 1)
  • Maximum resolution: 0.1 Ω
• Capacitance
  • Maximum capacitance: 9,999 µF
  • Accuracy: ±(1% + 2)
  • Maximum resolution: 0.01 nF
• Frequency
  • Maximum frequency: 200 kHz
  • Accuracy: ±(0.005% + 1)
  • Maximum resolution: 0.01 Hz
• Duty Cycle
  • Maximum duty cycle: 99.9%
  • Accuracy: ±(0.2% per kHz + 0.1%)
  • Maximum resolution: 0.1%
• Temperature Measurement
  • -200.0 °C to 1090 °C (-328.0 °F to 1994.0 °F), excluding probe
  • 80 BK temperature probe
    • -40.0 °C to 260 °C (-40.0 °F to 500 °F)
    • Accuracy: 2.2 °C or 2%, whichever is greater
• Conductance
  • Maximum conductance: 60.00 nS
  • Accuracy: ±(1.0% + 10)
  • Maximum resolution: 0.01 nS
• Diode
  • Range: 3 V
  • Resolution: 1 mV
  • Accuracy: ±(2% + 1)
• Duty cycle range accuracy: Within ±(0.2% per kHz + 0.1%)
• Environmental
  • Operating temperature: –20 °C to +55 °C
  • Storage temperature: –40 °C to +60 °C
  • Humidity (without condensation): 0%–90% (0 °C–35 °C)
  • Humidity (without condensation): 0%–70% (35 °C–55 °C)
  • Operating altitude: 2000 m
• Safety
  • Overvoltage category: EN 61010-1 to 1000 V CAT III, 600 V CAT IV
  • Agency approvals: CE, CSA, RCM