Fluke 805FC - Vibration Meter

Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration, bearing health and machine health.

Using the Fluke Connect Mobile App it’s now easier than ever to manage your vibration screening workflow. Integrated machine profile functionality allows you to setup machine profiles using the app and then push them directly to your 805 FC Vibration Meter. Users can then use the list of machine profiles to create work orders, and develop route based maintenance schedules which can be dynamically sent to technicians in field, helping to ensure the proper focus on critical assets. Once a machine is tested, the 805 FC communicates the results directly to the app and associates them with the proper profile and route. This data can easily be shared between teams, so you can make better maintenance decisions.

Includes

• USB cable
• Storage case
• Belt holster
• Quick reference guide
• Two (2) AA batteries

Features

• Quickly create asset list and work order on your PC, setup machine profiles using Fluke Connect App on your smart device, push routes to your 805 FC for your technicians in the field.
• Take accurate, reliable measurements at both low and high frequency ranges
• Store results in the cloud and share data with your team remotely
• Minimize measurement variations caused by device angle or contact pressure

Specifications

• Battery type: AA (2) Lithium Iron Disulfide 
• Battery life: 250 measurements 
• Size (L × W × H): 24.1 × 7.1 × 5.8 cm (9.5 × 2.8 × 2.3 in) 
• Weight: 0.40 kg (0.89 lb) 
• Connectors: USB mini-B 7-pin, external sensor jack (SMB connector) 

Accuracy Specifications

• Low frequency range (overall measurement): 10 Hz to 1,000 Hz 
• High frequency range (CF+ measurement): 4,000 Hz to 20,000 Hz 
• Severity levels: Good, satisfactory, unsatisfactory, unacceptable 
• Vibration limit: 50 g peak (100 g peak-to-peak) 
• A/D converter: 16-bit 
• Signal to noise ratio: 80 dB 
• Sampling rate 
• Low frequency: 20,000 Hz 
• High frequency: 80,000 Hz 
• Real time clock backup: Coin battery 
• Sensor 
  • Sensitivity: 100 mV/g ±10% 
  • Measurement range: 0.01 g to 50 g 
  • Low frequency range (overall measurement): 10 Hz to 1,000 Hz 
  • High frequency range: 4,000 Hz to 20,000 Hz 
  • Resolution: 0.01 g 
  • Accuracy: At 100 Hz ±5% of measured value 

• Amplitude Units 
  • Acceleration: g, m/s² 
  • Velocity: in/s, mm/s 
  • Displacement: mils, mm 

• Infrared Thermometer (Temperature Measurement) 
  • Range: −20°C to 200°C (−4°F to 392°F) 
  • Accuracy: ±2°C (4°F) 
  • Focal length: Fixed at ~3.8 cm (1.5") 

• External Sensor 
  • Note: Fluke supports but does not provide external sensors 
  • Frequency range: 10 Hz to 1,000 Hz 
  • Bias voltage (to supply power): 20 V dc to 22 V dc 
  • Bias current (to supply power): Maximum 5 mA 

• Firmware 
  • External interfaces: USB 2.0 (full speed communication) 
  • Data capacity: Database on internal flash memory 
  • Upgrade: Through USB 
  • Memory: Up to 3,500 measurements 

• Radiated Emission 
  • Electrostatic discharge: Standard EN 61000-4-2 
  • Electromagnetic interference: Standard EN 61000-4-3 
  • RE: Standard CISPR 11, Class A 

• Environmental 
  • Operating temperature: −20°C to 50°C (−4°F to 122°F) 
  • Storage temperature: −30°C to 80°C (−22°F to 176°F) 
  • Operating humidity: 10% to 95% RH (non-condensing) 
  • Operating/storage altitude: Sea level to 3,048 meters (10,000 feet) 
  • IP rating: IP54 
  • Vibration limit: 500 g peak 
  • Drop test: 1 meter