Makita DLX5101TX1 - 18V Brushless 5 Piece Combo Kit (2 x 5.0Ah)

Includes

• DHP486Z - 18V Brushless Hammer Drill Driver
• DTD173Z - 18V Brushless Impact Driver
• DGA508Z - 18V Mobile Brushless 125mm Paddle Switch Angle Grinder
• DHR242Z -  18V Brushless 24mm SDS Rotary Hammer
• DHS680Z - 18V Mobile Brushless 165mm Circular Saw
• 2X BL1850B - 5.0Ah Batteries
• DC18RC - Single Port Rapid Charger
• 199936-9 - Tool Carry Bag

DHP486Z - 18V Brushless Hammer Drill Driver (Tool Only)

• Massive drilling capacity with 152mm hole saw and 50mm auger bit capacity
• High powered Brushless motor produces 141Nm peak torque
• Compact overall length only 178mm for use in narrow work spaces
• High durability aluminium gear housing
• Mechanical 2 speed gearing with all metal gear construction

• Impact Rate
  
  • Hi: 0 - 31,500ipm
  • Lo: 0 - 8,250ipm
• Max. drilling capacities in masonry: 16mm
• Max. drilling capacities in steel: 13mm
• Max. drilling capacities in wood
  
  • Auger bit: 50mm
  • Self-feeding bit: 76mm
  • Hole saw: 152mm
• Max. lock torque: 125Nm
• Max. tightening torque
  
  • Hard: 130Nm
  • Soft: 65Nm
• No Load Speed
  
  • Hi: 0 - 2,100rpm
  • Lo: 0 - 550rpm
• Skin weight: 2.1kg
• Voltage: 18V
• Weight (with battery): 2.7kg

DTD173Z - 18V Brushless 4-Stage Impact Driver (Tool Only)

• Optimised battery layout, moves center of gravity in line with the grip for enhanced control
• Maximum fastening torque of 180Nm for heavy duty applications
• 4 stage speed selection & 4 Assist mode variations for optimised speed control
• Compact design at only 111mm in length for comfortable use in tight spaces
• Quick switch button for single handed mode selection
• Enhanced bit holder provides reduced bit wobble

• Drive Shank: 6.35mm(1/4") Hex
• Impact Rate
  • Max.: 0 - 3,800ipm
  • Hard: 0 - 3,600ipm
  • Med: 0 - 2,600ipm
  • Soft: 0 - 1,100ipm
• Max. tightening torque
  • Max.: 180Nm
  • Hard: 170Nm
  • Med: 50Nm
  • Soft: 20Nm
• No Load Speed
  • Max.: 0 - 3,600rpm
  • Hard: 0 - 3,200rpm
  • Med: 0 - 2,100rpm
  • Soft: 0 - 1,100rpm
• Overall Length: 111mm
• Skin weight: 0.8kg
• Voltage: 18V
• Weight (with battery): 1.5kg (BL1860B)
• Includes: 
  • Belt clip (346317-0)
  • 266622-8 (Truss Head Screw)

DGA508Z - 18V Brushless 125mm Electric Brake Paddle Switch Angle Grinder (Tool Only)

• BL Brushless Motor, provides more power and longer run times
• Electric brake, for increased safety and effeciency 
• Kickback detection, detects sudden changes in wheel speed and shuts down motor
• Automatic Torque Drive, automatically slows rpm increasing torque to power through cuts
• Anti restart function 
• Paddle switch design

• Net Weight: 2.6kg with BL1850
• No Load Speed: 8,500rpm
• Overall Length: 362mm
• Wheel Size: 125mm

DHR242Z - 18V Brushless 24mm SDS+ Rotary Hammer (Tool Only)

• Brushless DC motor helps to reduce energy loss by 30%
• One touch sliding SDS Plus type chuck
• Variable speed control by trigger
• Torque limiter
• Easy to grip handle ergonomically designed to provide a sure and comfortable grip in any application
• Natural position on mode selector provides 40 different bit angle settings
• 3 mode operation:- Rotation+Hammering, Hammering only, Rotation only
• Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures
• The tool body is separated into the upper and lower housings with vibration absorbing cushion rubbers
• Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

• Drive Shank: SDS Plus Type
• Impact Rate: 0-4,700ipm
• Joules: 2.0j
• Net Weight: 3.3kg
• No Load Speed: 0-950rpm
• Overall Length: 328mm
• Specifications - Capacity - Concrete: 24mm
• Specifications - Capacity - Steel: 13mm
• Specifications - Capacity - Wood: 27mm
• Vibration m/s2: 13.5
• Voltage: 18V
• Includes: 
  • Grip Assembly
  • Depth Gauge

DHS680Z - 18V Brushless 165mm Circular Saw (Tool Only)

• Powerful Brushless DC motor (BLDC)
• Automatic Torque Drive; automatically increases motor torque according to load conditions
• Magnesium base with 45 and 50 degrees bevel cutting capacity
• Compact and lightweight design
• Rear dust exhaust port
• Twin LED job light with pre-glow
• LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
• Tool hanger for hanging on a ladder or rafter
• Large lock off lever easily operated even with a gloved hand
• Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

• Bevel Capacity: 50 degrees
• Blade Diameter: 165mm
• Max Cutting Capacities - at 0 degrees: 57mm
• Max Cutting Capacities - at 45 degrees: 41mm
• Max Cutting Capacities - at 50 degrees: 37mm
• Net Weight: 3.3kg
• No Load Speed: 5,000rpm
• Overall Length: 350mm
• Voltage: 18V
• Includes:
  • Guide Rule (164095-8)
  • Hex Wrench (783217-7)

BL1850B-L - 18V 5.0Ah Battery

• Built in memory chip communicates the usage history with the charger
• Battery Fuel Gauge
• Built in shock absorbers protect the cells from jobsite conditions
• High energy cells pack more power per cell to reduce number of cells and overall weight
• Large release button for easy removal from the tool
• Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris
• 16 contact terminals provide consistent power and firm hold in any environment

• Cell Capacity: 5.0Ah
• Charge Time: 45mins w/DC18RC
• Net Weight: 615g
• Voltage: 18V

DC18RC - 18V Fast Battery Charger

• Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes and Li-Ion Compact series batteries in only 15 mins
• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
• Forced air cooling fan - cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition
• Charge Time: 15mins(Compact) 22mins(3.0Ah)
• Net Weight: 820g
• Overall Length: 185mm
• Voltage: 18V

199936-9 - Tool Carry Bag

• Wide deep main pocket provides quick tool location & easy access
• Adjustable heavy-duty shoulder belt makes lifting more comfortable
• Metal hooks at the ends to unfasten the belt when not needed
• Handles made of polypropylene tape & foam - Extra comfort
• L600 x W300 x H300mm
• Weight - 1.9kg