Fluke 6200-2 - Portable Appliance Tester

The Fluke 6200-2 PAT tester is a low weight, small size, one-touch solution with redesigned auto-test capabilities to help you increase the number of portable appliance tests completed each day. The 6200-2 is designed to enable you to work faster without compromising safety – yours or your customer’s. Pre-set test routines are initiated from a single button. This not only simplifies testing but also facilitates a faster, more efficient way of working. This portable appliance testers is also extremely compact, and has Fluke’s traditional ruggedness to be able to withstand working in the field. Packed with all the features you need for testing portable appliances, a Fluke PAT tester is a complete all-in-one solution.

Includes

• Quick reference guide
• Hard carrying case
• Test lead
• Test probe
• Crocodile clip
• Mains cord

Features

• Dedicated key for each test for ‘one-touch’ testing
• Pre-set pass/fail levels to save time
• Large backlit display for easy reading
• Single mains socket for appliance connection
• Separate IEC socket for easy mains/extension lead testing
• Detachable test leads for quick field replacement
• Integral carrying handle
• USB port for data transfer

Specifications

• Size (L × W × H): 200 × 275 × 114 mm 
• Weight: 3.13 kg 
• Power supply: 230 V +10% −15%, 50 Hz ±2 
• Power consumption: 
• 13 W typical (idle) 
• 60 W max during 25 A bond test 
• Operating altitude: Up to 2000 m 
• Sealing: IP40 (enclosure), IP20 (connectors) 

Accuracy Specifications

• Power-on test 
  • Display range: 90 V to 264 V 
  • Accuracy at 50 Hz: ±(2% + 3 counts) 
  • Resolution: 1 V 
  • Input impedance: >1 MΩ // 2.2 nF 
  • Maximum input mains voltage: 264 V 

• Earth bond test (Rpe) 
  • Display range: 0 to 19.99 Ω 
  • Accuracy (after bond test zeroing): ±(2.5% + 4 counts) 
  • Resolution: 0.01 Ω 
  • Test current: 
  • 200 mA AC −0% +40% into 1.99 Ω 
  • 25 A AC ±20% into 25 mΩ at 230 V 
  • Open circuit voltage: >4 V AC <24 V AC 
  • Bond test zeroing: Can subtract up to 1.99 Ω 

• Insulation test (Riso) 
  • Display range: 0 to 299 MΩ 
  • Accuracy: ±(5% + 2 counts) from 0.1 to 300 MΩ 
  • Resolution: 
  • 0.01 MΩ (0 to 19.99 MΩ) 
  • 0.1 MΩ (20 to 199.9 MΩ) 
  • 1 MΩ (200 to 299 MΩ) 
  • Test voltage: 500 V DC −0% +10% at 500 kΩ load 
  • Test current: >1 mA at 500 kΩ load, <15 mA at 0 Ω 
  • Auto discharge time: <0.5 s for 1 µF 
  • Maximum capacitive load: Operational up to 1 µF 

• Touch current test 
  • Display range: 0 to 19.99 mA AC 
  • Accuracy: ±(4% + 2 counts) 
  • Resolution: 0.01 mA 
  • Internal resistance (via probe): 2 kΩ 
  • Measuring method: Probe* 

• Substitute leakage current test 
  • Display range: 0 to 19.99 mA AC 
  • Accuracy: ±(2.5% + 3 counts) 
  • Resolution: 0.01 mA 
  • Test voltage: 100 V AC ±20% 

• Load/leakage test – load current 
  • Display range: 0 A to 13 A 
  • Accuracy: ±(4% + 2 counts) 
  • Resolution: 0.1 A* 

• Load/leakage test – load power 
  • Display range: 0.0 VA to 3.2 kVA 
  • Accuracy: ±(5% + 3 counts) 
  • Resolution: 
    • 1 VA (0 to 999 VA) 
    • 0.1 kVA (>1.0 kVA)* 

• Load/leakage test – leakage current 
  • Display range: 0 to 19.99 mA 
  • Accuracy: ±(4% + 4 counts) 
  • Resolution: 0.01 mA* 

• PELV test 
  • Accuracy at 50 Hz: ±(2% + 3 counts) 
  • Overload protection: 300 V rms 
  • Warning threshold: 25 V rms 

• Environmental specifications 
  • Operating temperature: 0 to 40 °C 
  • Relative humidity: 
    • Non-condensing <10 °C 
    • 95% from 10 to 30 °C 
    • 75% from 30 to 40 °C 

• Safety specifications 
  • Safety rating: Complies with EN61010-1 3rd edition 
  • Measurement category: CAT II, 300 V, pol 2 
  • EMC compliance: EN61326-1, portable 
  • EMI immunity: 3 V/m