Fluke 417D/62MAX+ - Laser Distance Meter & Thermometer Kit

The most rugged Fluke 62 MAX+ IR thermometer teamed with the easy-to-use 417D Laser Distance Meter has everything you need to configure HVAC layouts and troubleshoot electrical problems. For electrical devices use the IR thermometer to test overheating issues and for HVAC layout, use the 417D to configure layout distance or area and use continuous measurement for marking references.

Features

Fluke 417D Laser Distance Meter

• The Fluke 417D laser meter is accurate, durable, and easy to use—just point and shoot
• Instantly measure up to 40 m (131 ft.) with 1-button point-and-click
• Continuous measurement capable: adjusting as you move closer and farther from your target
• Quickly calculate area (sq. feet/meters)
• 1-meter drop tested and IP54 rated: built to withstand rainy or dusty conditions
• Great for interior and exterior applications

Fluke 62 MAX+ IR Thermometer

• Distance to spot: 12:1
• Dual lasers: Identifies area to be measured
• Dust and water-resistant: IP54 rated
• Rugged: 3-meter (9.8-foot) drop tested
• Ergonomically designed: Completely redesigned for a more natural hand fit
• Large, backlit display: Makes data easier to read, even in dark areas

Specifications

Fluke 417D Laser Distance Meter

• Laser class: II 
• Laser type: 635 nm, <1 mW 
• Protection class: IP54 
• Battery life (2 x AAA 1.5 V NEDA 24A / IEC LR03): Up to 3,000 measurements 
• Size (H x W x D): 11.9 x 3.8 x 2.6 cm 
• Drop test: 1 meter 
• Weight (with batteries): 95 g (3.35 oz) 
• Temperature range – Storage: -25°C to 70°C (-13°F to 158°F) 
• Temperature range – Operation: -10°C to 50°C (14°F to 122°F) 
• Calibration cycle: Not applicable 
• Maximum relative humidity: 85% @ 20°F to 120°F (-7°C to 50°C) 

Fluke 62 MAX+ IR Thermometer

• Power: 1x AA alkaline battery 
• Battery life: 8 hours with laser and backlight on 
• Weight: 255 g (8.99 oz) 
• Size: 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in) 
• Operating temperature: 0°C to 50°C (32°F to 122°F) 
• Storage temperature: -20°C to 60°C (-4°F to 140°F) (without battery) 
• Operating humidity: 
• ≤90% RH @ 10°C to 30°C (50°F to 86°F) 
• ≤75% RH @ 30°C to 40°C (86°F to 104°F) 
• ≤45% RH @ 40°C to 50°C (104°F to 122°F) 
• Operating altitude: 2000 meters above mean sea level 
• Storage altitude: 12,000 meters above mean sea level 
• Drop test: 3 meters 
• Implement standard: Q/ASF01 

Accuracy Specifications

Fluke 417D Laser Distance Meter

• Typical range: 0.2–40 m / 0.6–131 ft 
• Typical measuring tolerance¹: ±2.0 mm + 1.5 mm / ±0.06 in 
• Maximum measuring tolerance²: ±3.0 mm / 0.12 in 
• Accuracy up to 10 m (±): ±2 mm 
• Display: 2 line / 1 mm / 1/32 in 
• Display illumination: Yes 
• Laser point at distance: 6 / 30 / 60 mm (10 / 40 / 100 m) 
• Area: Yes 
• Units setting (smallest units displayed): 0.000 m, 0°00′ 1/32, 0 in 1/32 
• Auto laser switch off: 90 sec 
• Auto power switch off: 180 sec 
• Safety:
  • CAN/CSA-C22.2 No. 61010-1-04
  • UL Std. No. 61010-1 (2nd Edition)
  • ISA-82.02.01
  • IEC 61010-1:2001
  • EN60825-1:2007 (Class II) 
• EMC: EN 61326-1:2006 
• 3 Year Warranty

Fluke 62 MAX+ IR Thermometer

• Temperature range: −30 °C to 650 °C (−22 °F to 1202 °F) 
• Accuracy (calibration geometry, ambient 23 °C ±2 °C): 
• ±1.0 °C or ±1.0% of reading (whichever is greater) 
• ±2.0 °C at −10 °C to 0 °C 
• ±3.0 °C at −30 °C to −10 °C 
• Optical resolution: 12:1 (calculated at 90% energy) 
• Response time (95%): <300 ms (95% of reading) 
• Spectral response: 8 to 14 microns 
• Emissivity: 0.10 to 1.00 
• Display resolution: 0.1 °C (0.2 °F) 
• Repeatability (% of reading): ±0.5% of reading or ±0.5 °C (whichever is greater) 
• Compliance: IEC 61010-1, Pollution Degree 2 
• Laser safety: IEC 60825-1 Class 2, 650 nm, <1 mW 
• Ingress protection rating: IP54 per IEC 60529