Fluke 376FC - Clamp Meter True-RMS

The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.

Find the cause of difficult problems
The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.

Includes

• 18-inch iFlex® Flexible Current Probe
• TPAK magnetic hanging strap
• TL75 Test Leads
• Two AA batteries (Installed)
• Soft carrying case
• Coated instruction card
• Safety information sheet

Features

• Measures AC/DC current with included iFlex current probe
• VFD low pass filter for accurate measurements of non-linear signals
• Remotely log, trend and monitor to pinpoint intermittent faults
• Inrush measurement to filter out noise and capture starting current

Specifications

• Maximum voltage between any terminal and earth ground: 1000 V 
• Batteries: 2 AA, NEDA 15A, IEC LR6 
• Operating temperature: -10 °C to +50 °C 
• Storage temperature: -40 °C to +60 °C 
• Operating humidity (non-condensing <10 °C):
  • ≤90% RH at 10 °C to 30 °C,
  • ≤75% RH at 30 °C to 40 °C,
  • ≤45% RH at 40 °C to 50 °C 
• Operating altitude: 2000 m 
• Storage altitude: 12,000 m 
• Size (L × W × H): 249 × 85 × 45 mm 
• Weight: 395 g 
• Jaw opening: 34 mm 
• Flexible current probe diameter: 7.5 mm 
• Flexible current probe cable length (head to electronics connector): 1.8 m 
• Safety:
  • IEC 61010-1
  • Pollution Degree 2
  • IEC 61010-2-032 CAT III 1000 V / CAT IV 600 V
  • IEC 61010-2-033 CAT III 1000 V / CAT IV 600 V 
• IP rating: IEC 60529 IP30, non-operating 
• Radio Frequency: 768–FBLE, IC: 6627A-FBLE 

Accuracy Specifications

• AC Current via Jaw 
  • Range: 999.9 A 
  • Resolution: 0.1 A 
  • Accuracy:
    • 2% ±5 digits (10 Hz to 100 Hz) 
    • 2.5% ±5 digits (100–500 Hz) 
  • Crest Factor (50 Hz/60 Hz):
    • 3 @ 500 A 
    • 2.5 @ 600 A 
    • Add 2% for C.F. >2 
• AC Current via Flexible Current Probe 
  • Range: 2500 A 
  • Resolution:
    • 0.1 A (≤ 600 A) 
    • 1 A (≤ 2500 A) 
  • Accuracy: 3% ±5 digits (5–500 Hz) 
  • Crest Factor (50/60 Hz): 3.0 at 1100 A 
    • 2.5 at 1400 A 
    • 1.42 at 2500 A 
    • Add 2% for C.F. >2  
• Position Sensitivity 
  • i2500-10 Flex / i2500-18 Flex   
    • Position A 
      • Distance from Optimum: 0.5 in (12.7 mm) / 1.4 in (35.6 mm) 
      • Error: ±0.5 %   
    • Position B 
      • Distance from Optimum: 0.8 in (20.3 mm) / 2.0 in (50.8 mm) 
      • Error: ±1.0 %   
    • Position C 
      • Distance from Optimum: 1.4 in (35.6 mm) / 2.5 in (63.5 mm) 
      • Error: ±2.0 %
• DC Current 
  • Range: 999.9 A 
  • Resolution: 0.1 A 
  • Accuracy: 2% ±5 digits 
• AC Voltage 
  • Range: 1000 V 
  • Resolution:
    • 0.1 V (≤600.0 V) 
    • 1 V (≤1000 V) 
  • Accuracy: 1% ±5 digits (20 Hz to 500 Hz) 
• DC Voltage 
  • Range: 1000 V 
  • Resolution:
    • 0.1 V (≤600.0 V) 
    • 1 V (≤1000 V) 
  • Accuracy: 1% ±5 digits 
• mV dc 
  • Range: 500.0 mV 
  • Resolution: 0.1 mV 
  • Accuracy: 1% ±5 digits 
• Frequency via Jaw 
  • Range: 5.0 Hz to 500.0 Hz 
  • Resolution: 0.1 Hz 
  • Accuracy: 0.5% ±5 digits 
  • Trigger level: 
    • 5 Hz to 10 Hz, ≥10 A 
    • 10 Hz to 100 Hz, ≥5 A 
    • 100 Hz to 500 Hz, ≥10 A 
• Frequency via Flexible Current Probe 
  • Range: 5.0 Hz to 500.0 Hz 
  • Resolution: 0.1 Hz 
  • Accuracy: 0.5% ±5 digits 
  • Trigger level: 
    • 5 Hz to 20 Hz, ≥25 A 
    • 20 Hz to 100 Hz, ≥20 A 
    • 100 Hz to 500 Hz, ≥25 A 
• Resistance 
  • Range: 60 kΩ 
  • Resolution: 
    • 0.1 Ω (≤600 Ω) 
    • 1 Ω (≤6000 Ω) 
    • 10 Ω (≤60 kΩ) 
  • Accuracy: 1% ±5 digits
• Capacitance 
  • Range: 1000 μF 
  • Resolution: 
    • 0.1 μF (≤100 μF) 
    • 1 μF (≤1000 μF) 
  • Accuracy: 1% ±4 digits