Cabac T2712EL

Rcd Tester
$670
In stock
Item ID
1015548

Digital RCD Tester 240V

This compact hand held RCD tester is designed for professional use to obtain accurate values of 'Trip Time' with the selection on a dial switch of the trip current.

Resistors are used to pass the trip current between earth and active therefore a correction factor in percentage is available on the display for adjustment according to the line voltage. The trip time is measured to a maximum of 3.000 seconds, while the fault current is selectable on a range from 3 to 500mA.

The unit has been designed for ease of operation whilst maintaining safety, reliability and accuracy.

  • Three basic tests:
    • Wiring test
    • Line Voltage to Earth
    • Tripping time
  • Menu driven and easy to use
  • LED wiring check function to check wiring prior to test
  • Test angle selection - 0 or 180°
  • Dynamic battery check
  • Microprocessor controlled
  • Tough rugged meter, designed to give accurate measurements in harsh environments


To complete the test:

  • Connect the unit and check that the LED display indicates the wiring is correct
  • Check that the line voltage is within tolerance
  • Set the trip current on the selector and hit the test button
  • Once the test is complete, the operator can view the following on the LDC display:
    • Circuit voltage
    • Percentage error current (from nominal voltage)*
    • Disconnection time
    • Polarity at opening
    • Over Temperature Protection

* Voltage fluctuations are taken in to account by the microprocessor, and the percentage error current will be the same as the voltage fluctuations shown on display.

Safety and Compliance: Safety Meets IEC 1010-1CAT III 300V, EMC Meets EN55011

Overload Protection: Over-voltage, over-temperature and fuse protected

Function Range   Accuracy  
System Voltage 240V ±2% ±1V
Voltage Tester 20~280VAC ±1V ±2%
Trip Settings 3,5,10,15,20,30,50,
  100,150,250,300,500mA  
  % Proportional  
to Voltage
Disconnection Time 0 - 2.999 Seconds ±2% ±1mS
Timer 1mS ±2mS
Phase Start Selection - 180° -
  Operating Temperature   -5 to 45°C -

Each unit is supplied in a robust case with test leads, batteries and an instruction manual.

  • Batteries: 6 x AA batteries (included)
  • Size: 200 x 85 x 55mm
  • Weight: 540g
Categories Measure & Test » Testing Equipment » Electrical Specialty Testers
Brand Cabac
Item ID 1015548
Barcode 9318674685371
Write Your Own Review
You're reviewing:Cabac T2712EL
Your Rating
ShippingShipping Estimate
Store Pickup
  • Free pickup is available at any of our WA stores.  Click here to find your closest store
Free Shipping
  • All items marked with "Free Shipping" will be shipped to any location in mainland Australia or Tasmania free of charge.
Australia Post [Satchel]
  • Items will be sent in an Australia Post Express Post satchel.
  • Delivery time is between 2-5 business days from despatch date.
Perth Metro Express
  • The Perth metro region includes all those within the postcode range 6000-6214 & 6800-6999
  • Orders are typically sent with Australia Post.
  • Delivery time is typically 1 business day from despatch date.
Fixed Rate [Parcel]
  • Orders will typically be sent by road transport with Australia Post or one of our Couriers.
  • Delivery time is between 2-10 business days from despatch date.
Courier Service
  • Heavy and/or bulky items will be shipped by road transport with one of our couriers.
  • Orders shipped with a courier can only be delivered to a fixed address (PO Boxes not accepted)
  • Courier deliveries to residential addresses (ie. someone lives there) will incur additional freight charges. The appropriate shipping option should be selected on checkout.
  • If the non-residential option is selected in error at checkout we'll contact you after your order is placed to request additional payment or to arrange delivery to an alternative non-residential address. We could, for example, ship your order to a friend or family members place of business.
  • If you can't use a non-residential shipping address you can choose to have your order delivered to your local freight depot. Simply select the "Non-Residential" shipping option and enter your shipping street address as "C/O Freight Depot" at checkout. The courier company will contact you directly and provide further instructions when your order is ready for pickup.
  • Delivery time is between 2-10 business days from despatch date.
  • Courier deliveries to remote Australian islands may incur additional freight charges.

Delivery Times

Delivery times will vary depending on your location but will generally take between 1-10 business days. Currently stocked items will be despatched same day or next day. Unfortunately it is not possible for us to carry all stock items 100% of the time. If an item is out of stock we will order from our supplier immediately and mark your order as priority.

Warranty

Tools covered by manufacturers warranty can be returned to us or your nearest authorised warranty agent for repair or replacement.  Find out More.


Returns

If you are not satisfied with a purchased item it may be returned to us within 30 days and we'll give you a refund (excluding delivery costs). All merchandise must be returned in original packing, unused and include a copy of your invoice. Please contact us prior to returning an order so we can assure quick processing of the cancellation.

You may also like

Recently Viewed
No recently views items
Clear All
© Toolmart Australia Pty Ltd. All Rights Reserved. ABN: 96 056 599 896